ninjette.org - View Single Post

Alex · September 29th, 2012, 03:06 PM

More pics in that same gallery.

Kyle's a fan:

The small spools they had at the shop fit fine. Only the smallest spools will work, or you need a spacer, as the spool boss is underneath the swingarm and recessed a couple mm. These were small enough that they still fit underneath the swingarm and snugged up against the mounting hole. If they were any larger, they would would have been blocked by the swingarm.

The front of the bike took the pitbull stemstand even better than the new-gen, it no longer makes contact underneath the front plastics as it lifts.

September 29th, 2012, 03:06 PM	#13
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	More pics in that same gallery. Kyle's a fan: The small spools they had at the shop fit fine. Only the smallest spools will work, or you need a spacer, as the spool boss is underneath the swingarm and recessed a couple mm. These were small enough that they still fit underneath the swingarm and snugged up against the mounting hole. If they were any larger, they would would have been blocked by the swingarm. The front of the bike took the pitbull stemstand even better than the new-gen, it no longer makes contact underneath the front plastics as it lifts. __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)