ninjette.org - View Single Post

beazy411 · November 26th, 2012, 05:53 PM

So I installed a LED light on the bike to replace the stock incandescent one, which by the way is a big improvement in light output but it was $30. While I was in there mucking around I was going to add on a flasher unit too, but lo and behold there are 3 freaking wires and not the two that I was expecting. The black is obviously the ground/return but which one is the actual brake light wire, red or blue? Any one have any ideas?

November 26th, 2012, 05:53 PM	#1
beazy411 ninjette.org member Name: Aaron Location: New Orleans Join Date: Oct 2012 Motorcycle(s): 2013 Ninja 300 Posts: 159	Brake light wiring So I installed a LED light on the bike to replace the stock incandescent one, which by the way is a big improvement in light output but it was $30. While I was in there mucking around I was going to add on a flasher unit too, but lo and behold there are 3 freaking wires and not the two that I was expecting. The black is obviously the ground/return but which one is the actual brake light wire, red or blue? Any one have any ideas? __________________________________________________ ~B.