ninjette.org - View Single Post

diablo250 · May 25th, 2009, 01:01 AM

So after shimming, I started up the bike with the choke. After I got the air out of the gas lines the bike started to idle really high-roughly 4-5k rpm. I turned down the choke to around 2, and then off completely. I turned it back on to see if the problem persisted and it did. Everything runs great, the choke just seems to have a bit more authority now...is this a normal occurrence after shimming?

May 25th, 2009, 01:01 AM	#1
diablo250 Crafty Salesman.... Name: Mike Location: Las Anjules(L.A.) Join Date: May 2009 Motorcycle(s): 09 250r, 06 sv650sf Posts: 170	Very high revs with choke So after shimming, I started up the bike with the choke. After I got the air out of the gas lines the bike started to idle really high-roughly 4-5k rpm. I turned down the choke to around 2, and then off completely. I turned it back on to see if the problem persisted and it did. Everything runs great, the choke just seems to have a bit more authority now...is this a normal occurrence after shimming?