Quote:
Originally Posted by skilletmo
If we use the gaskets and the problem still happens when we put the new clutch set and have to open it again then do we have to order new gaskets or can we reuse the new ones we will be putting on? Also can someone tell me what bearings/gears might be the problem, so we can eliminate the whole clutch idea if it ends up not being the problem and we can move on to probably the transmission.
|
The screen's gasket is strong and you can re-use it several times if careful; the cover's is likely to get damaged after one use.
There is bearing between the shaft and the cage, another entering the transmission, another between the puller and the front plate.
The gears are the ones transferring rotation from clutch to transmission.
There is a sprocket behind the cage for the cam chain.