Quote:
Originally Posted by gilmorec61
Step 3: Place containers to drain old coolant into under circled bolts. Remove circled bolts with a 10mm and 8mm socket. There are 2 bolts, one right under the headers, one right on the end of a tube like thing.
|
For step 3, which drain bolt should I un-tighten/undo first? The one at the header or the one at the bottom? Will the coolant shoot out from the header area? I want to say that 1 take care of reservoir as in steps, then do the bottom drain bolt per gravity, then touch the top one near the header for anything that is left? Am I correct?