ninjette.org - View Single Post - Low idle , high choke, shim needle help !

rojoracing53 · May 17th, 2013, 07:35 AM

I know most people don't like the idea of spending $500-600 on their bike so I'm just going to put this here and you can ignore it if its not your thing.

I have a full Leo Vince exhaust with a Dynojet stage 2 kit and I've never had to use the choke, I let my bike warm up for about 30 seconds before I ride off at low RPMs for the first few miles with zero stalling problems. And I ride year rode so that includes temps down to -2C.

My bike idle is set to 1500k warm and when it starts stone cold it will idle at about 800-1000 before I get on it.

May 17th, 2013, 07:35 AM	#6
rojoracing53 Fast-Guy wannabe Name: Jason Location: Brentwood, Ca Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot. MOTM - Jan '13	I know most people don't like the idea of spending $500-600 on their bike so I'm just going to put this here and you can ignore it if its not your thing. I have a full Leo Vince exhaust with a Dynojet stage 2 kit and I've never had to use the choke, I let my bike warm up for about 30 seconds before I ride off at low RPMs for the first few miles with zero stalling problems. And I ride year rode so that includes temps down to -2C. My bike idle is set to 1500k warm and when it starts stone cold it will idle at about 800-1000 before I get on it.