ninjette.org - View Single Post - Semi-DIY

BEELINE12000 · June 14th, 2009, 10:42 PM

thanks for the rep buddy!!!
just a few things i did a bit diff though to really make it more flush.

1--trim around the chrome part not just the back part so it will fit snug inside the clear part.
2--when putting the sealant to the clear part while trying to make it stick to the fairing...hold down ( or flush) the signal with strong duct tape or gorilla tape for about 1 day or so while the sealant dried up nice and good
3--if you have excess silicone sealant use a box cutter style razor to remove the excess.

June 14th, 2009, 10:42 PM	#37
BEELINE12000 ninjette.org newbie Name: fer Location: california Join Date: Jun 2009 Motorcycle(s): (sold)--2008 250 ninja currently 2008 zx6r Posts: 7	thanks for the rep buddy!!! just a few things i did a bit diff though to really make it more flush. 1--trim around the chrome part not just the back part so it will fit snug inside the clear part. 2--when putting the sealant to the clear part while trying to make it stick to the fairing...hold down ( or flush) the signal with strong duct tape or gorilla tape for about 1 day or so while the sealant dried up nice and good 3--if you have excess silicone sealant use a box cutter style razor to remove the excess.