Quote:
Originally Posted by walty87
What did you want me to jump with the wire?
With the engine on the yellow blue coming out of the relay only has 1 or .1 on it. Is that coming in or out? Think it's the relay??
|
We will know next.
What about the red wire?
With the engine running, jump the grey and the blue-yellow wires at the relay (use a heavy gauge wire) and check if one of the lights come on while you do that (Don't worry, nothing will be damaged because what you will do with the jumper is what the relay does automatically).
If so, switch between hi and low beam and see if both work properly.
Then, with the bridge still there and the headlight on, stop the engine with the kill switch, leaving the key-switch on and see what happen to the lights (stay on or turn off).
I am assuming that you have new bulbs in place now.