Quote:
Originally Posted by Asspire
no.
check diode pack b, there will be two red wires coming out of it, start bike and check them, they BOTH should have voltage when running. If it doesn't, the lights shouldn't work, jump the grey wire to blue again so that they do, leave the bike running, and check both red wires at the diode pack again. One of them should at least have voltage going thru it, the other (most likely the one across from the yellow will not. Follow this :
if stator checks out ok, then diode pack is faulty
|
So the red wires going to the diode pack have .2 going in or out of them when the bike is on. After I jump the headlights on they then have 10.6v running through them.
I cannot seem to find that wiring connector pack. I have a 2012 and still have my stock airbox. It's on the right side? I cant find it