ninjette.org - View Single Post

Somchai · July 15th, 2013, 08:13 PM

Since you already know about FactoryPro on their website you should take a look about the 250 ignition advancer RTR-KAW-5-05. Maybe it's useable for the 300 also, since the 300 only goes up to 31 degrees at 7,000 rpm. Read the comments there.
Good luck.

July 15th, 2013, 08:13 PM	#6
Somchai Freedom for Germany Location: This World Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.	Since you already know about FactoryPro on their website you should take a look about the 250 ignition advancer RTR-KAW-5-05. Maybe it's useable for the 300 also, since the 300 only goes up to 31 degrees at 7,000 rpm. Read the comments there. Good luck.