ninjette.org - View Single Post

n4mwd · July 28th, 2013, 07:54 PM

I think I may be totally wrong on that. I do know that the guys at the service area of broward motorsports had me bring mine in and then told me what bearing to get. They were correct. Maybe give them a call and see if they will help you.

If only one journal was marked then it could be that only that one needs that size bearings. But I'm not sure.

Based on what you are saying, it sounds like its probably the 1494 bearing. That's what the manual says to use. The 92028-1431 part number is not coming up.

Also remember that kawasaki sells the bearings in halves. So you need 4 of them.

July 28th, 2013, 07:54 PM	#39
n4mwd ninjette.org certified postwhore Name: D Location: Palm Beach, FL Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot. Blog Entries: 1	I think I may be totally wrong on that. I do know that the guys at the service area of broward motorsports had me bring mine in and then told me what bearing to get. They were correct. Maybe give them a call and see if they will help you. If only one journal was marked then it could be that only that one needs that size bearings. But I'm not sure. Based on what you are saying, it sounds like its probably the 1494 bearing. That's what the manual says to use. The 92028-1431 part number is not coming up. Also remember that kawasaki sells the bearings in halves. So you need 4 of them. __________________________________________________ My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED!