View Single Post
Old August 6th, 2013, 04:56 PM   #1
conrya5
ninjette.org member
 
conrya5's Avatar
 
Name: Ryan
Location: South Eastern, PA
Join Date: Jun 2012

Motorcycle(s): 2010 Metalic Island Blue Ninja 250r

Posts: 206
Need Electrical Help - Dual USB & Cigarette Outlet

Hi everyone,

I decided to install a Dual USB Outlet and Cigarette Outlet on my 250. Got everything wired up and installed neatly, looks good but..
the outlets do not work. This also involved installing an accessory fuse block.



I read 14 volts going into each socket on my motorcycle. I also bench tested the sockets with 12 volts going in.
The green LED on the Dual USB light up but would not charge my mobile phone during the bench test and the cigarette outlet worked fine.

I have included the wiring diagram that shows exactly how everything is wired on my bike; please take a look and see if there is anything obviously wrong.



My next move is going to be bypassing the ground bar and go directly to the neutral side of the battery from the sockets.
Also, I'm not sure if the correct size fuses are in the accessory fuse block.

Any help would be greatly appreciated!!
conrya5 is offline   Reply With Quote