Quote:
Originally Posted by Falcor
Haven't had the time or money to go get any of it. I got payed yesterday so I might be able to order some online, have any recommendations?
I don't mind having to readjust it in order to lube it.
|
I buy the grease at Pepboys; that is for the heads of the cable and the pivot of the lever (and for everything else in the bike).
For inside the cable, I use several drops of 3-in-1 oil (from Walmart).
The picture shows a special applicator and spray lubricant for cables.
Yes, you will need to turn the adjuster to the max slack, to remove the counter-nut and bolt of the pivot and then to pull the cable out of the support's guide.
There is danger of braking the clutch safety switch nob during re-assembly; so, be careful.