View Single Post
Old September 19th, 2013, 09:33 PM   #98
The_big_dill
ninjette.org member
 
The_big_dill's Avatar
 
Name: Phil
Location: Aurora, ON, Canada
Join Date: Jan 2013

Motorcycle(s): 1987 Ninja 250 custom gold

Posts: 218
Quote:
Originally Posted by n4mwd View Post
Take a look at this thread to make sure you got all the passages.
Well i did suck on that tube, being weary not to inhale too many fumes and when i went to crank the bike, it stumbled for a few revs again and died, then i crank forever with no result.

I removed the carbs to clean again and I got every passage in both directions, carb cleaner came out every hole.

I also got the air cut valve apart and the rubber diaphragm looks like is not as smooth as the rubber diaphragm in the head of each carb.

I let the carb sit in the cleaner overnight and will put it back together tomorrow.

Plugs were not fouled this time though.

Heres hoping that the carb was simply out of tune.
The_big_dill is offline   Reply With Quote