View Single Post
Old December 16th, 2013, 01:14 PM   #22
NINJosh.
ninjette.org member
 
Name: Josh
Location: New Orleans
Join Date: Dec 2013

Motorcycle(s): 2010 BMW F800GS, 2009 Kawasaki Ninja 250r, 2001 Suzuki DRZ400

Posts: 14
Carburetor removal

I removed the Carburetors today so i'll be ready when my Jet kit gets here.
at first i tried to remove them without messing with the airbox but this was just stupid. and frustrating. so instead i pulled the battery box and the ONE bolt holding the airbox to the frame
IMG_1040.jpg
the bolt hole is right in the center of the picture on the left side of the airbox.
and the whole thing just slid back 2 inches and the carb boots popped right off.
IMG_1045.jpg
IMG_1044.jpg
loosen both straps on the left carburetor boot and just pull it out completely to give the carbs room to come out, the right boot you can just loosen on the carburetor.
IMG_1046.jpg
IMG_1049.jpg
NINJosh. is offline   Reply With Quote