ninjette.org - View Single Post - Adding schrader valves to the forks? to add pressure to the air spring?

Somchai · January 1st, 2014, 08:13 PM

Maybe before changing many things and going for many tests you could give this a try (sorry it's german only, so I'd use Google for translation):
"Through the use of HKS GGV the so-called telescopic fork breakaway torque is completely eliminated. The smallest bumps and the like are no longer transferred from the unsprung part of the telescopic fork on the bike. The result is silky, smooth ride and the safest ground. A noticeable benefit! In combination with a HKS extremely lubricated chain results in a "smoothest driving"! A breakaway torque no longer exists!"

Here's the link: http://www.hks-czech.de/hks-ggv.html
In Germany many riders are having a big improvement with using this.

January 1st, 2014, 08:13 PM	#26
Somchai Freedom for Germany Location: This World Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.	Maybe before changing many things and going for many tests you could give this a try (sorry it's german only, so I'd use Google for translation): "Through the use of HKS GGV the so-called telescopic fork breakaway torque is completely eliminated. The smallest bumps and the like are no longer transferred from the unsprung part of the telescopic fork on the bike. The result is silky, smooth ride and the safest ground. A noticeable benefit! In combination with a HKS extremely lubricated chain results in a "smoothest driving"! A breakaway torque no longer exists!" Here's the link: http://www.hks-czech.de/hks-ggv.html In Germany many riders are having a big improvement with using this.