I picked up a 1983 Honda CB750SC project bike a couple weeks ago; thought I'd share the progress. I've never dismantled a bike before and simple carb extraction from the Ninja 250 was the most experience I've had. Hopefully, you guys can offer some guidance when I inevitably get stuck.
The bike was not running when I purchased it. The carbs were already extracted and dismantled, so I had to install it to make sure everything was fine before going further.
The Overview:
The Engine:
Front:
Jumping the bike to make sure it works (after reinstalling the carbs):
The Dash (33k km's on a 31 year old bike?):
The Back:
The Headers:
Foreshadowing the inside of the engine:
Front Sprocket:
After making sure it works, the tear-down begins:
Carbs and airbox out: