Quote:
Originally Posted by NevadaWolf
Oh excellent! That's one I've been looking at.
Overall how does it fit against the tail light and undertail? I'd really like a close up picture of the edges that come up to be against the cover of the tail light (my undertail has broken there so this was one of the only kits I found that covers the hole I have).
Is it possible to bend the license plate light down to shine more on the plate vs out behind you?
|
I will post some closeups tommorow since its too dark right now, but it fit great on the bottom, my undertail was cracked also, thus why I changed, but the fit is good. The top piece of the tail fits okay, but you know the clip ons that are on the rear fender, its like the side piece of the bike which had the 3 slip ons, well when you remove the rear fender, you lose the "grip" for the rear plastics, because one half of the clip on is on the fender, but, it does not really hold it on well with the stock fender anyways, its more of a support, its still held by all the bolts so there is no problem. The tail you probably could bend, I just don't mind it. Also where the license plate goes, the bracket, I had to trim it off like an inch on each since because it looked like this <=[the plate]=>, but now since its trimmed, you only see the plate and not the extra metal.