ninjette.org - View Single Post - Taking apart transmission, need an advice

NinjaVAN · September 26th, 2014, 11:16 AM

My problem is the second gear wont shift by any means without spinning the back wheel for a while.

My friend suggested it was the shift drum problem (bike was down on the left side) and my research confirms this version.

So in order to get to the drum and gears I need to take the tranny apart but I have no Idea if I need to take apart top end (remove head/cylinder) first. Or the bottom end removal would be enough.

Please help

September 26th, 2014, 11:16 AM	#1
NinjaVAN ninjette.org newbie Name: Ivan Location: Vancouver BC Join Date: Sep 2014 Motorcycle(s): 2006 Ninja 250 Naked Stripper Posts: 9	Taking apart transmission, need an advice My problem is the second gear wont shift by any means without spinning the back wheel for a while. My friend suggested it was the shift drum problem (bike was down on the left side) and my research confirms this version. So in order to get to the drum and gears I need to take the tranny apart but I have no Idea if I need to take apart top end (remove head/cylinder) first. Or the bottom end removal would be enough. Please help