Quote:
Originally Posted by alex.s
there are two ways to access the transmission, the easiest does not give you full access-- through the clutch cover. remove the clutch and you'll have access to the side of the shift drum as well as the external linkage arms that spin the hub. it sounds like this might be your issue.
alternatively the other option is splitting the crank case to access the transmission.
see this video of mine;
|
Thanks for the video!!!
But it is still not it. I took off the whole clutch and could see the fork that you were trying to put back. My fork is OK, reacts properly on every single rod spin and grabs the shift drum the way it suppose to. But I couldn't spin the drum even with the alien wrench, so the problem is definitely inside.