December 6th, 2014, 09:45 AM
|
#4
|
|
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011
Motorcycle(s): 2007 Ninja 250
Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
Originally Posted by alex192
Thanks for response.
So if I bridge the connector which plugs into the relay with a small piece of wire, should this show if it is the relay which is the problem (ie if all lights come on, it is the relay. If no lights come on, then it is probably a problem with the wiring, especially as the relay was working earlier)?
I'll have another check over the connectors into the fuse box and into the relay.
|
Yes, but you have to have the hand switch turned one side or the other.
Take a look at the circuit:
http://faq.ninja250.org/wiki/Wiring_...s_%26_diagrams
__________________________________________________
Motofool 
.................................Never ride faster than your guardian angel can fly
"Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí
|
|
|