December 7th, 2014, 09:56 AM
|
#7
|
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011
Motorcycle(s): 2007 Ninja 250
Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
Quote:
Originally Posted by alex192
Wiring diagram helped a lot, thanks.
.............Also noticed that the heat shrink containing all of the wires from the ignition barrel is zip tied to one side right after the point where it exits the bottom of the ignition barrel. Is it common for Kawasaki to use zip ties in the factory or is this is a sign that someone has been in there before me?
Cheers for help guys, solving the problem slowly!
|
You are welcome, Alex
I don't know about the zip tie.
You may find some useful information in this article:
http://faq.ninja250.org/wiki/How_to_...gnition_switch
__________________________________________________
Motofool
.................................Never ride faster than your guardian angel can fly
"Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí
|
|
|