Quote:
Originally Posted by BlownWideOpen
The shims I used are the ones that came with the FP kit, so not sure where they fall on the thickness scale. Says #4 if that means anything. I'll do what you suggested.
|
the shims in the kit are very thin, they should be visible in the picture in the post I linked, They would be the shims on the FP needle and then the washer/shims on the OEM needle are more typical #4 washers you get from a hobby shop.
__________________________________________________
I love the smell of burning pre-mix in the morning
I don't think I'm a lot dumber than you thought that I think that I thought I was once.
