I am able to shift it through all 6 gears!!! So I measured the clearances today.
Front:
----EX----
.009"---.009"<--- I could actually tightly, squeeze in a .010" feeler on both
------------
.006"---.005"
----IN----
Rear:
----IN----
.005"---.005"
------------
.009"---.009"<--- Feeler was somewhat tight on both
----EX----
Specs are: .004"-.008" Intake, .008"-.012" Exhaust
Now they are all in spec, but on the tighter side of things. So I think I am going to change that and make them be on the loose side so that I won't have to adjust them for a while.