ninjette.org - View Single Post - DIY Install of the Bikemonkey Integrated LED tail light

DsmRacing · August 27th, 2009, 07:45 AM

Posted via Mobile Device
Just to add to this thread, if you use the BM tail light signals with the stock front blinkers then you will need an electronic flaher. You can purchase the FL-32 flasher at Autozone for $8.00. Works great! Remove your stock flasher and install the FL-32, no cutting, direct fit. I also used the kawi universal signal wire kits that I purchased from cyclegear. Again direct fit, no cutting.

August 27th, 2009, 07:45 AM	#59
DsmRacing ninjette.org member Name: Chad Location: Valrico, FL Join Date: Apr 2009 Motorcycle(s): 2008 Green 250R and 06 636 maybe? Posts: 16	Posted via Mobile Device Just to add to this thread, if you use the BM tail light signals with the stock front blinkers then you will need an electronic flaher. You can purchase the FL-32 flasher at Autozone for $8.00. Works great! Remove your stock flasher and install the FL-32, no cutting, direct fit. I also used the kawi universal signal wire kits that I purchased from cyclegear. Again direct fit, no cutting.