an amazing follow up to my "wax bullet" post above.
1. the cowboy shooting association offers a kit with precast .45 cal bullets made of wax and polymer.
2. case primer pockets are drilled out to the point the primers fall in and out.
ok, not so happy about the primer pocket being totally drilled. If I were to do it I'd drill them half way or something so that you still have a little "bite" on that primer when seated. Besides you can't drill them through, there must be a bottom to the pocket for the 'anvil' part of the primer to seat against. But you could clean that pocket up until it was just a tiny friction fit and could be popped out with just the de-priming rod and your hand, no press needed.
and holy crap, this guy is using foam ear plugs... and REUSING them.
this is my new .44 mag practice in the basement set up.
Link to original page on YouTube.