Quote:
Originally Posted by crazymadbastard
first thing is check the connection at the lever.
|
I pulled of the switch, the contacts on the outside of the switch box are fine, but I can see at the point, right where they go inside the little box, there is some corrosion. I have tries to take the switch apart, but looks like they didnt use screw to piece the two halves together, used platic welder. has two drain holes on the bottom so am going to try the ol' baking soda and vinegar trick like on battery terminals to see if it will eat away the corrosion on inside. If that doesn't work that on to partsninja it is