ninjette.org - View Single Post

Corysninja · September 24th, 2020, 12:17 PM

so I own a 2009 ninja 250 and I recently took the carburetor out and cleaned it and put everything back together. I am now having an issue of the bike not starting. It does not even crank over. The neutral light is not coming on as well. Everything else works brake lights and blinker etc. I've checked all the fuses and battery wires. Everything is all good as far as that goes. I know the bike is in neutral because I can roll it around without the clutch in. The only way I can get it started is when I jump the solenoid with a screwdriver. I have looked online and its telling me the problem could be caused by a bad neutral safety switch but I have no idea where that is located at on my bike.

Any and all help would be very appreciated. Trying to get the last few rides in before it gets too cold! Thank you!!

September 24th, 2020, 12:17 PM	#1
Corysninja ninjette.org newbie Name: cory Location: foristel Join Date: Sep 2020 Motorcycle(s): 2009 kawasaki ninja 250 Posts: 3	No neutral light and not cranking so I own a 2009 ninja 250 and I recently took the carburetor out and cleaned it and put everything back together. I am now having an issue of the bike not starting. It does not even crank over. The neutral light is not coming on as well. Everything else works brake lights and blinker etc. I've checked all the fuses and battery wires. Everything is all good as far as that goes. I know the bike is in neutral because I can roll it around without the clutch in. The only way I can get it started is when I jump the solenoid with a screwdriver. I have looked online and its telling me the problem could be caused by a bad neutral safety switch but I have no idea where that is located at on my bike. Any and all help would be very appreciated. Trying to get the last few rides in before it gets too cold! Thank you!!