ninjette.org - View Single Post - DIY- Carb Work on 2008 Ninja 250 carbs

kkim · April 28th, 2011, 11:47 AM

take a peek from the right side of the bike and see if you can see how much of the threaded adjuster is showing at the end of the cable. if you have a bit more to go, lower the idle to 1500 and see how much is left. be sure the bike is fully warmed up and the choke completely off when setting the idle speed. as long as the cable doesn't fall out of the adjuster bracket, you should be good.

April 28th, 2011, 11:47 AM	#10
kkim Join Date: Nov 2008 Posts: Too much.	take a peek from the right side of the bike and see if you can see how much of the threaded adjuster is showing at the end of the cable. if you have a bit more to go, lower the idle to 1500 and see how much is left. be sure the bike is fully warmed up and the choke completely off when setting the idle speed. as long as the cable doesn't fall out of the adjuster bracket, you should be good.