I understand that the Ninja will not spark the plugs if the voltage falls to 10vdc or lower... at least on my 2012 version the motor still will crank over good but there will be no spark at all.....
and cleaning the carbs on these Ninjas is extremely hard the pilot jet passage ways are very hard to get clean as they are small and have 4 exits with a cross over deep inside the carb... which is near impossible to clean
send them to Ducattiman he does professional work at a reasonable price !
....
either will dry out the carb diaphragms ! quickly and be real expensive to replace ...hit them with WD40 for a good soak next time you have them off !!!
....
Bob....
__________________________________________________
Its too late when you've gone too far !
|