Quote:
Originally Posted by choneofakind
EDIT: I didn't catch that. Kerry's right.  |
Quote:
Originally Posted by kbryant
A few things - in South Florida conditions - hot humid - it would not be surprising at all to see it running on the rich side of things. Try going down on the main jet to a 96 and see if it improves.
Also, you note that you have "2 Washers under needle with clip on 3rd notch" No washers go under the clip. You are in affect raising the needle way too much, which would cause a very rich condition. The washers go above the clip. So if indeed you have installed them like that, correct that first before changing the main jet to a 96. This may very well be your issue.
|
My mistake, the washer are in fact above the clip, like the diagram in the jet kit shows. Looks like going down a jet size should help out.
Not sure if you remember but i was the kid who will called the full stainless steel system in lake worth when you were down here, called you a few times when i put the system on and my bike wouldn't idle because I accidentally turned the knob on the side that adjusts idle?
