ninjette.org - View Single Post

DannoXYZ · July 18th, 2020, 03:13 PM

Pretty darn cool!

Personally, I think off-the-shelf engines are easiest and simplest. Someone else has already done engineering and hard work ahead of time. Someone's put a Honda CR250 engine in Ninjette. Also RZ350 engine too I think. With turbo! Only saw this being built-up, don't know if it was ever completed.

Also there's 4-part series on YouTube about turbo EX500. Guy supposedly had done numerous ZX10Rs and Hayabusas previously. So EX should be simple.

July 18th, 2020, 03:13 PM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Pretty darn cool! Personally, I think off-the-shelf engines are easiest and simplest. Someone else has already done engineering and hard work ahead of time. Someone's put a Honda CR250 engine in Ninjette. Also RZ350 engine too I think. With turbo! Only saw this being built-up, don't know if it was ever completed. Also there's 4-part series on YouTube about turbo EX500. Guy supposedly had done numerous ZX10Rs and Hayabusas previously. So EX should be simple.