Quote:
Originally Posted by Cra1g
On an unrelated note, I'm still missing shifts sometimes in 3rd and 4th gears. mostly during hard acceleration. I make sure to apply deliberate pressure to the shift lever, but for some reason it sometimes just doesn't "click" into gear and I have to give it another try (sometimes even another try after that). I have the FactoryPro spring that I'm going to try out and see if that helps, but I've heard that it makes the lever a bitch to shift. We shall see!
|
Your clutch-cable may not be releasing the clutch all the way. Do a push-test in neutral vs. clutch-in:
1. put bike in neutral and push it around
2. shift into 1st-gear, then squeeze clutch-lever and push
Is there any extra drag in case#2? If so, the clutch is dragging and messing up your shifts. Adjust lever for extra throw or tighten the cable (unscrew adjuster).