ninjette.org - View Single Post

DannoXYZ · February 17th, 2019, 08:31 PM

Try something like this:
https://www.homedepot.com/p/CRC-QD-1...30-6/202262505

If you're good with your hands, you can disassemble switch and lightly sand corrosion off contact areas. Be careful of little spring size of grain of rice.

Otherwise look in junkyards or call around. You can also use left-hand controls from another bike. Looks identical to stuff off '90s CBR600s.

February 17th, 2019, 08:31 PM	#2
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Try something like this: https://www.homedepot.com/p/CRC-QD-1...30-6/202262505 If you're good with your hands, you can disassemble switch and lightly sand corrosion off contact areas. Be careful of little spring size of grain of rice. Otherwise look in junkyards or call around. You can also use left-hand controls from another bike. Looks identical to stuff off '90s CBR600s.