View Single Post
Old August 10th, 2017, 01:12 PM   #135
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Another shout-out for Gordon's amazing work!!! I bought a derelict 2008 250R that had been sitting around for 2-years and was all gummed up. Here's what carbs looked like when I brought bike home.



I managed to get crispy algae off, but it was still all clogged up everywhere else inside. Bike wouldn't start properly, needed choke full-time to barely idle. Would die as soon as I gave it any throttle.Trying to run engine this way eventually caused it to hydrolock with fuel from leaky floats and break starter-gear. See DIY Starter Gear repair..

So I sent off the carbs to Ducatiman and got them back surprizingly quick!!! Using combination of alien-tech , black-magic, good ol-fashioned expertise and skill, he completely refurbished them. Replaced vacuum hoses and upgrade fasteners to allen-buttonheads which gives them a really modern high-tech look!



Installed them, and bike started right up and idled with no problems!! Crisp throttle-response on road, couldn't be any better!! Highly recommend Gordon's carb refurb service; some of the best money I've spent on this bike!

Last futzed with by DannoXYZ; August 10th, 2017 at 02:34 PM.
DannoXYZ is offline   Reply With Quote


1 out of 1 members found this post helpful.