View Single Post
Old January 16th, 2023, 05:25 PM   #8523
Bob KellyIII
Retired motorcycle Mc.
 
Bob KellyIII's Avatar
 
Name: Robert
Location: Weed, California.
Join Date: Jul 2021

Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L.

Posts: A lot.
I made my carb Sync tool from PVC pipe and just made 2 small containers for the oil in line to each carb just to catch the oil (just in case) those connect to a long loop to each other with the Auto transmition oil in it.... all hooked to a board about 5' long.... I hang that from the ceiling attach a line from the containers at the top to each carb's intake port and read the results on the oil level line down on the board.... it's extremally sensitive ... I used it on my XS650 yamaha and it worked great... haven't tried it on the Triumph or Ninja yet though.....
it's a simple, effective method to adjust and balance the carbs that will not allow the oil to be sucked into the engine. (as it will catch it in either container)
....
I think I posted a few pictures of it here but not sure... I know I did on the XS650.org forum.......that was about 5 years ago.
....
it really smoothes out an engine to have those carbs synced!
.....
Bob........
__________________________________________________
Its too late when you've gone too far !
Bob KellyIII is offline   Reply With Quote