ninjette.org - View Single Post - Adjusting Throttle Cable - Barrel adjusters and Throttle body adjusters are maxed out

theob · July 18th, 2012, 09:21 PM

Does anyone know how to adjust (tighten up) the throttle cable when the barrel adjusters on the bars is maxed out and the adjuster on the side of the carburator is similarly maxed out? I thought that I would be able to reclamp the throttle wire somewhere and start afresh, but there are knobs on each end of the wire so that is not the way it works.

Any ideas? My throttle is fairly loose.

July 18th, 2012, 09:21 PM	#1
theob ninjette.org newbie Name: Theo Location: Portland, OR Join Date: May 2012 Motorcycle(s): 636, SV650, '08 ninjette race bike Posts: 4	Adjusting Throttle Cable - Barrel adjusters and Throttle body adjusters are maxed out Does anyone know how to adjust (tighten up) the throttle cable when the barrel adjusters on the bars is maxed out and the adjuster on the side of the carburator is similarly maxed out? I thought that I would be able to reclamp the throttle wire somewhere and start afresh, but there are knobs on each end of the wire so that is not the way it works. Any ideas? My throttle is fairly loose.