Quote:
Originally Posted by DannoXYZ
Bring your wonky fuse into Autozone and measure it with their 3306N. Sometimes auto-ranging doesn't work very well. The clutch switch is also concern, should be 0.0 or 0.L, nothing in between.
|
Alright, thanks. I’ll do that. I was intimidated by the fact that the 3306N is not auto ranging.
So when I have the multimeter points on the two outside prongs of the clutch switch
47D29B91-5C66-48BF-9631-1258D4DE1FAE.jpeg, then press the clutch button in, It shouldn’t show a number? Like I mentioned, when I did this It showed 8.0. Then I released the clutch button and it went back to 0, pressed again It went to 7, and then 5.7 the last time (slowing fluctuating around those values).