June 9th, 2011, 10:22 AM
|
#164
|
|
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009
Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F
Posts: A lot.
|
Quote:
Originally Posted by infinitethrill
Dropped the rearset from the top back slot to the bottom back slot. Just lowering them a tad bit. In the rear position, the edge of the left rearset is hitting the chain guard plastic right near the bolt that holds the chain guard there. There is a gouge in the plastic where it is hitting. I can feel the swingarm move (speedbump or similar) and smack my foot pretty hard through the peg. May have to dremel it down a bit, but the metal bracket is just below that... Otherwise seems to be working good.
|
Quote:
Originally Posted by Live2ride
I just went out to my shed and jumped up and down with the full force of my 250lb. Butt on my bike. It was still at least 2 inches away from the rearset adjuster, even further from the rearset itself. I could make a video if you don't believe me  . |
Preload setting?
|
|
|