ninjette.org - View Single Post - Successful failure! ( vacuum formed vinyl wrap)

GAU-8 · February 12th, 2021, 02:38 PM

Also, depending on the thickness of your plastic, you will lose some resolution of your formed plastics edges and lines.

This is one of the videos that explains a lot. I built my tank system, after his. ( he has another video, and parts list) ( but you dont need a tank system, i used a shop vac for years, they do fine, for thin plastics)

But here is a recent simplified tutorial

https://youtu.be/Tugr2juVWuk

Link to original page on YouTube.

February 12th, 2021, 02:38 PM	#13
GAU-8 Socially inept. Yet FUN! Name: C Location: Houston Tx Join Date: Oct 2015 Motorcycle(s): Current machines- 1992 SECA II 600, 2006 Ninja 250, 2008 Ninja 250 Posts: 231	Also, depending on the thickness of your plastic, you will lose some resolution of your formed plastics edges and lines. This is one of the videos that explains a lot. I built my tank system, after his. ( he has another video, and parts list) ( but you dont need a tank system, i used a shop vac for years, they do fine, for thin plastics) But here is a recent simplified tutorial https://youtu.be/Tugr2juVWuk Link to original page on YouTube.