Quote:
Originally Posted by kkim
are you saying a clamp is loose?
any intake leak is a bad thing and yes, that could be the source of the problem.
also, when was the last time the valves were adjusted/checked?
|
i sent the guy who cleaned the carbs out the first time an email to check on the circuit passages.
as for the intake, i dont mean the clamp is loose. it just isnt as tight as any of the clamps on the carb to engine boots. when i checked for vacuum leaks before i and noticed the slight leak around the airbox boot, i tested the issue by completely removing both boots (i ran it for a very short amount of time because it was running on unfiltered air) and the same problem existed.
and as for the valves, i dont know when they were last adjusted. do you think checking them will help?