Quote:
Originally Posted by Buffalony
BTW: can someone give me a link to a 15T front sprocket that doesnt need shimming? please.  |
The Drivenracing.com sprocket 1098-520-15T measures the correct 9.3mm if anyone is searching for the new gen one.
I did the swap but could never get the nut to budge with a breaker bar. I had to resort to an electric impact wrench (2x4 through the wheel not required) on the sprocket nut and the rear axle nut to adjust the chain.
An impact wrench removes these buggers in about 3 seconds.
http://www.ridegear.com/detail.cfm?m...2&related=long
Random link, the picture is not correct, but this is what it looks like.