A person in the city I was born in ! How about that ! HAHAHA
Welcome.
yep stumbling off idle means dirty carbs I don't care if you cleaned them with Kryptonite !, or sent then to Nasa to be repaired...their still dirty !
I found some neet tiny brushes on Amazon for carb cleaning but in the past I usually just used a OXY/Accet. torch tip cleaning tool... which is a little set of wires with file stamped into them... they work great... that and compressed air....
I never had much luck using the DIP method although they do look cleaner on the outside when your done... do a thuro cleaning... every thing that can be removed remove ! and make sure you can get air down each passage. !
I just had to do the same thing to my Ninja and now it runs great when it's warm
make sure you set the airscrews ( I set mine a little rich and it wasn't quite enough)
....
Welcome aboard !
Bob.......
__________________________________________________
Its too late when you've gone too far !
|