Quote:
Originally Posted by DannoXYZ
|
Yeah, I was already looking into electrolysis after seeing this video:
https://youtu.be/ICW01HFbaxc
The plate inside the fuel filler neck makes it more difficult to isolate the sacrificial anode but I have a 1.5” #9 rubber (neoprene) stopper that fits the fuel filler neck perfectly. If I don’t drill perfectly straight I’ll stick a rubber grommet in the oval opening below. There doesn’t seem to be a good unpainted grounding point since the place he clamped to is painted and had rubber isolators, but I’ll screw some raw bolts in some place if I have to. I still need to find a stopper for the 30mm fuel sender hole but Lowe’s had several smaller sizes that’ll probably cover me.
Thanks!