YEAR: 2009
INTAKE MODIFICATIONS: Snorkel removed
EXHAUST MODIFICATIONS: Area P 18" Quiet Core Full
JET KIT OR STOCK? Jet Kit
BRAND OF JET KIT? Dynojet
MAIN JET: 96
NEEDLE AND CLIP POSITION: #3 with 1 washer
MIXTURE SCREW SETTINGS: 2.5
ELEVATION Sea level
MISCELLANEOUS INFORMATION ABOUT YOUR BIKE'S JETTING SETUP: The Dynojet needles with #3 clip position are slightly shorter than the stock needles. When I first installed the exhaust and jet kit, I was using the 100 main jet and 2 washers under the needles. It was way rich at the bottom and would bog down considerably. Sustained freeway speeds at 9k also killed my mileage down to around 30mpg. So I removed one of the washers and skipped down to the 96 main jet. High end is fine - mileage is back to around 45-50. But I'm considering removing the last washer as it still seems a little rich at the bottom.
|