ninjette.org - View Single Post - can anyone tell me why this is happening with my idle?

garyg199 · July 26th, 2016, 11:04 AM

I'm trying to tune my carbs after I've had a rich mixture. I've been turning the idle mixture screws and I'm almost at 3 turns out and the idle hangs and also rises still. Should I keep turning them out? what is happening? I just put the stock 38 pilots in because the 40s were too big. I have 100# mains in and needles on third position. Why is this happening?

July 26th, 2016, 11:04 AM	#1
garyg199 ninjette.org member Name: Gary Location: New Jersey Join Date: May 2016 Motorcycle(s): 2009 Ninja 250r Posts: 111	can anyone tell me why this is happening with my idle? I'm trying to tune my carbs after I've had a rich mixture. I've been turning the idle mixture screws and I'm almost at 3 turns out and the idle hangs and also rises still. Should I keep turning them out? what is happening? I just put the stock 38 pilots in because the 40s were too big. I have 100# mains in and needles on third position. Why is this happening?