ninjette.org - View Single Post

sharky nrk · January 21st, 2015, 12:28 PM

First fix was to weld washers on the inside and outside of the tabs on the frame, stopping them from moving around. This worked for a season, then he upgraded to a Penske and removed the washers from the frame and used the stock 12mm bolt.

January 21st, 2015, 12:28 PM	#25
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	First fix was to weld washers on the inside and outside of the tabs on the frame, stopping them from moving around. This worked for a season, then he upgraded to a Penske and removed the washers from the frame and used the stock 12mm bolt. __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare