View Single Post
Old February 23rd, 2013, 08:36 AM   #89
choneofakind
ninjette.org certified postwhore
 
Name: .
Location: .
Join Date: Feb 2011

Motorcycle(s): .

Posts: Too much.
MOTM - Feb '13, Feb '14
It very simple to swap springs.

Take off the caps. Pull out the springs. Measure the length of the stock spring + Stock spacer. Measure the length of the new springs. Make a spacer out of 3/4" PVC to compensate for any difference in length. Drop in new springs + the PVC spacer. Done.

That's easier than swapping the whole front end. Plus then you don't have to deal with swapping over an entire front end.
choneofakind is offline   Reply With Quote