ninjette.org - View Single Post

DannoXYZ · April 13th, 2020, 12:46 PM

Output voltage of zero at stator output means full voltage drop before RR. Zero voltage means full-output of stators are going to ground. It’s like measuring ground-wire of light-bulb, it’s going to be zero after all power has been dissipated by bulb. More accurate to measure stator output in amps rather than voltage.

Here’s good test:

1. Measure VAC and amps output of stator @4000rpms with RR connected with no load

2. Measure VAC and amps output of stator @4000rpms with RR connected and powering headlight

April 13th, 2020, 12:46 PM	#27
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Output voltage of zero at stator output means full voltage drop before RR. Zero voltage means full-output of stators are going to ground. It’s like measuring ground-wire of light-bulb, it’s going to be zero after all power has been dissipated by bulb. More accurate to measure stator output in amps rather than voltage. Here’s good test: 1. Measure VAC and amps output of stator @4000rpms with RR connected with no load 2. Measure VAC and amps output of stator @4000rpms with RR connected and powering headlight Last futzed with by DannoXYZ; April 13th, 2020 at 01:48 PM.