Quote:
Originally Posted by Ducati999
The answer the your first question above: "What do you do immediately after you press on the bar?" (Answer) Stop once the lean angle is correct for the turn.
Answer to the second question above: "What do you do to stop the bike from turning?" (Answer) Push/pull bars in the opposite direction.
|
Ant, I think you missed slightly on the second one, only because of terminology. "Turning the bike" means causing a change of direction from the path it would take anyway. A bike that's leaned over with no pressure on the bars is carving a circle but it's not "being turned" because it's at steady state.
(Try it with your bicycle... hold the saddle, tilt it over and push forward... it'll go in a circle without you pressing the bar at all.)
Consider that we're told to "finish turning the bike" as fast as possible, and before the apex. That's consistent with the idea that simply releasing bar pressure stops the bike from turning further.
I'd say the answer to both is the same... release bar pressure. You initiate the turn by pressing on the bar. You maintain turning (meaning the bike continues to lean over) as long as the bar is pressed. Once you release pressure, the bike STOPS turning and is now tracking in an arc because it's leaned over.
Countersteering the other way gets the bike stood up.